PVC plastic pipe is readily available, reasonably priced and ridiculously versatile. These ingenious hacks utilize this useful, DIY-friendly material.
Ingenious DIY PVC Hacks That’ll Make Your Life Simpler
1
/
38
2
/
38
PVC Knife Holders
Carrying kitchen knives safely for picnics and camping trips is challenging. So one reader made knife containers out of 2 pvc pipes and caps. He glued the cap on one end and marked the unglued cap with an 'X.' That way he always knows which end to open. We think this is one of the most brilliant camping storage ideas ever!
Editor’s Tip: PVC is affordable and versatile for home plumbing, but some health advocates warn against it. Here’s to know whether PVC pipes are safe or not.
3
/
38
Make a Mattress Sling
Trying to wrestle a heavy, floppy mattress anywhere is tough. Many mattresses have handles, but they're not intended for carrying. They're actually made to help you position the mattress, so they're not very strong.
Here's an easier way to carry a mattress: Make a simple rope sling that will give you and your helper a lot more control. Thread the rope through the mattress handles. Slip a 5-in. piece of 1-in. PVC pipe over the rope ends and then loop and tie each end to create a comfortable sling grip. Flip the mattress over so the sling is on the bottom and you're on your way.
4
/
38
Fishing Rod Organizer
We got sick and tired of our fishing rods getting tangled, so we came up with this easy fishing rod organizer. All you need is a length of 3-in.-diameter PVC pipe and a foam swimming pool noodle for this DIY garage storage system.
Drill 1-in. holes spaced every 4 in. in the PVC pipe. Use a utility knife to cut slits in the foam noodle, spacing them 4 in. apart. Line up the pool noodle on the wall so that at least two of the slits sit over studs. Pull those slits apart, slide in a fender washer, and screw the noodle to the wall with 2-in. screws. Then screw the PVC pipe to the wall beneath it at a comfortable height and insert your fishing rods. Look Ma, no more tangles!
Want some more DIY garage organization ideas? Check out 27 Easy Ways to Organize Your Garage
5
/
38
String Pipe Cutter
Amaze your friends and mystify your neighbors by cutting PVC pipe with a string. It's a great trick to know if you have to cut pipe that's buried in a wall or some other tight spot. We used a mason's line to saw through 2" PVC pipe in less than a minute.
Need to splice PVC pipe? Here's how!
6
/
38
Storage Pockets for Skinny Things
Saw off short pieces of 1-1/2-, 2- or 3-in. PVC plumbing pipe with 45-degree angles on one end. Screw them to a board to hold paint brushes, pencils, stir sticks and just about any other narrow paraphernalia in your shop. Mount them by drilling a 1/4-in. hole in the angled end, and then drive a 1-5/8-in. drywall screw through the hole into the board.
7
/
38
Vacuum Attachment Holder
Take one of your shop vacuum attachments to the home center and find a PVC tee that fits. Drill a hole in the tee large enough to accept a screwdriver, place a small plywood spacer behind it and screw it to the wall.
Find out how to clean a clogged vacuum.
8
/
38
Bungee Cord Organizer
Elastic cords can quickly become a tangled mess. Find the one you need at a glance with this handy rack made from 3- or 4-in. PVC pipe. Just drill 1/2-in.-diameter holes in the pipe to match the slightly stretched lengths of your cords. Keep it in your trunk or shop, out of the reach of children. Check out this other genius bungee cord hack.
9
/
38
Accessorize Your Mower
If you keep a few tools handy while you mow, you can deal with stray weeds as you notice them—no need to hunt for them later. Short sections of PVC pipe taped to the mower's handle will hold tools and other necessities.
10
/
38
Fast, Inexpensive Table
Aunt Edna just called to tell you she's coming for the holidays (and bringing some nice people she met hanging around the bus station). Trouble is, you don't have enough table space. Don't worry; just run to the home center and get a 10-ft. length of 3-in. PVC pipe, four 3-in. toilet flanges and a hollow-core door. Hollow-core 'slabs' are 80 in. long and available from 28 to 36 in. wide. Cut the PVC to make legs and assemble the table as shown. And then check out our tips for finishing a table top. It's not a masterpiece, but under a tablecloth it looks fine. Plus it's light-weight and easy to disassemble and store until next year. Just remember that hollow-core doors aren't very strong; don't sit or stand on the table.
11
/
38
Cheap Storage Cylinders
Build cheap storage cylinders from PVC pipe, end caps, female adapters and cleanout plugs. Parts are available in an assortment of diameters at any hardware store or home center. Cut the pipe to length with a handsaw or chop saw. Glue an end cap to one end and a female adapter to the other pipe end with PVC cement. Twist in a threaded cleanout plug for a cap. If sealing isn't important, you can drill holes in the pipe to decrease the cylinder's weight. Use the cylinders to store and protect fishing rods, drill bits, cross-country skis, blueprints or anything long and skinny—you name it.
12
/
38
PVC Hammer Holder
Next time you're nailing, do it in style with this sturdy but stylish hammer holder. To make one, use a hacksaw or band saw to cut away one side of a 6-in.-long piece of 2" PVC pipe, leaving 2 in. at the bottom to drop the hammer into. To create belt slots, drill 1/4-in. holes in two lines and clean out the waste between the holes with a rattail file. That's it—drop in the hammer and enjoy its easy-to-reach location. Once you've got all that done, get to work trying out the hammer hacks no one ever thought to tell you.
13
/
38
Get a Grip
Get a better grip on your straight-handled shovel by epoxying a 1-in. PVC tee to the end.
Best-Reviewed Snow Shovels on Amazon
14
/
38
Oil Recovery System
If you're environmentally concerned and try to completely drain oil containers when servicing vehicles and lawn equipment, then you'll like this PVC hack. This oil recovery system is made up of 1-in. PVC pipe and assorted 1-in. PVC fittings. Cut 1-in. PVC pipe into 3-in. and 6-in. lengths and glue everything together with PVC cement as shown. Build the oil recovery system as large as needed. Use pipe straps to mount it to the wall, placing it high enough off the floor so a gallon jug with a funnel can slide underneath to catch the last of the oil.
You can also build a wall-mounted bike rack with storage.
Here’s a video that helps show how to glue PVC.
15
/
38
PVC Sanding Files
Stick sandpaper to cutoff pieces of PVC water pipe with spray-on adhesive and you'll be able to sand concave curves to perfection. PVC pipe is labeled by inside diameter; here's an index for the outside diameter of useful pipe sizes.
- 1/2-in. i.d. = 7/8-in. o.d.
- 3/4-in. i.d. = 1-in. o.d.
- 1-in. i.d. = 1-1/4-in. o.d.
- 1-1/4-in. i.d. = 1-5/8-in. o.d.
- 1-1/2-in. i.d. = 1-7/8-in. o.d.
16
/
38
Fake Plumbing Pipes
Put in a fake PVC pipe complete with a cleanout plug somewhere in your basement. Unscrew the plug and there are the secret compartment items. Find out the first place burglars look and other secrets they won't tell you.
17
/
38
PVC Curling Iron Holsters
Hate the messy look of curling irons lying on the vanity or the toilet tank? Here's a tip for you. Use hook-and-loop tape to attach five-inch lengths of 2-in. PVC pipe to the vanity door to hold the curling irons. Do the same thing with three-inch pieces of 1-1/2-in.-dia. pipe to hold the cords. Just measure your curling irons to see how long your "holsters" need to be. Let your curling irons cool before you stow them away.
18
/
38
Overhead Storage in the Garage
Stow bulky items overhead by cementing together a simple rack from 2"Â PVC pipes and fittings. Bolt the straight pipe to the ceiling joists to support heavy loads, and screw the angled pieces from the 'wye' connectors into the cross brace to stabilize the whole rack. The PVC's smooth surface makes for easy loading and unloading.
19
/
38
Pegboard Cubbyholes
Here's a tool storage technique for all those slender tools and shop accessories. Cut short lengths of PVC pipe (1-1/2-in. and 2-in.-dia. pipes work well for most items) and slide them over pegboard hooks. Then load them up with files, hacksaw blades, zip ties, pencils, stir sticks ... you get the idea.
20
/
38
Gift Wrap Rack
Here's a terrific way to keep rolls of wrapping paper and ribbon handy, dust-free and unwrinkled. Simply glue a bunch of 30-in.-long pieces of 3-in. PVC waste pipe with all-purpose PVC glue. The rack can sit right on your worktable and you can store it underneath or in a closet. Learn more about working with PVC plastic pipe here.
21
/
38
Caulk Tube Nest
Before I made this caulk nest for my shop, the tubes rolled all over the shelves like slippery logs. To build one, cut 10-in.-long pieces of 2-in. PVC pipe and glue them side to side with PVC cement. To get straight glue lines, use the print along the side of the pipe as a guide. As you glue, hold the pieces together for 60 seconds with hand pressure or a clamp until the glue sets. Be sure to apply the glue only in a well-ventilated area. Glue on one tube at a time to fit the available space. That's it— your caulk tubes are now organized.
Expert Guide for Choosing the Right Caulk for Any Job
22
/
38
Long-Reach Vacuum
A PVC pipe connected to a vacuum hose lets you reach up to high spots or into narrow crannies, so you can suck up those cobwebs around skylights or exterminate dust bunnies behind radiators. A 10-ft. piece of PVC pipe is inexpensive. Here's another vacuum attachment hack.
In the plumbing aisle, you'll also find PVC and rubber 'reducer' couplings that let you connect your vacuum hose to a different-size pipe.
23
/
38
Odds-and-Ends Storage
Fill a sturdy cardboard box with sawed-off shipping tubes or scraps of larger PVC pipe. Then use it to store and organize all those short pieces of molding, pipe and dowels.
Clever Tool Storage Ideas
24
/
38
Quick-Draw Table Saw Accessories
Keep your table saw's miter gauge and push stick within easy reach with a couple of sections of 1-1/2-in. PVC pipe bolted or zip-tied to a convenient spot on the frame under the table. Attach the miter gauge holster using the existing frame bolts, or drill holes in the legs for machine screws. For the push stick holster, we drilled a couple of sets of matching holes about an inch apart on the pipe and tautly zip-tied it to the leg.
5 Must-Have Table Saw Accessories for Your Home Workshop
25
/
38
PVC Dust Catcher
Vacuum dust and chips right at the source! Bolt a 2-in. pot magnet (available at home centers and hardware stores) to a 4-in. x 2-in. PVC pipe reducer and position it near the sander, saw, router or lathe that's making a dust storm in your shop. A 2-in. shop vacuum hose 'press-fits' nicely in the 2-in. reducer end, and the pot magnet ferociously grips any metal surface.
If the working surface near the dust source is wood, screw a blank steel electrical box cover to the surface to hold the dust chute on target.
26
/
38
PVC Storage Hangers
It's true—we love PVC pipe. Or let's say we appreciate the way it inspires and accommodates tool and hardware storage. Here's the latest DIY PVC project. Cut 2-in. pieces of 3-in. PVC and saw away a 2-in. section so it looks like Pac Man. (Remember Pac Man?) Drill screw holes and attach the hangers to studs or shop walls. Space pairs for convenient horizontal storage of longer tools such as levels and glue clamps, and use single segments for ropes, electrical cords or anything else that you want securely stored yet easily accessible. Try this tip and you'll learn never to be peeved by leftover PVC.
51 Brilliant Ways to Organize Your Garage
27
/
38
PVC Pipe Clamp Rack
Are your pipe clamps missing in action right when you need them? Never again, thanks to this slick snap-in, snap-out storage rack, made from PVC pipe. For 1/2-in.-diameter iron pipe, use 3/4-in. PVC, and for 3/4-in.-diameter pipe use 1-in. PVC.
To make the rack, cut 2-in. lengths of PVC, and with a hacksaw or band saw, slice them lengthwise about 3/16 in. past the diameter's center line. This creates the gripping action to firmly hold the heavy iron pipe. Drill and countersink two holes in each PVC piece, then space and screw them along a pair of 2-in.-wide boards. Attach the upper board to your shop wall and snap a pipe clamp in either end to position the lower board for screwing to the wall.
28
/
38
PVC Tool Pockets
Holster your screwdrivers, chisels, files and other hand tools in 3-in.-long pieces of 1/2- and 3/4-in. PVC pipe. Cut away the upper open section with a hacksaw or band saw, drill a hole, screw the piece on a board, and drop in the tools. If you're using a band saw, slice off the cutaway section from a long length before cutting off the 3-in. holster.
21 Top Tool Storage Tips, Tricks and Ideas
29
/
38
Panpipe Tool Storage
While this tool storage device may look like a variation on the Pan flute of Greek mythology, it's actually a great place to store tools that easily get lost—like chisels, files, pencils, scroll saw blades and hobby knives. For the fatter tools, use PVC cement to join short pieces of 1-1/4-in. PVC pipe side to side into a panpipe design, then add pieces of 1/2-in.pipe along the front of the flute for skinnier tools. Build a simple case around the pipes to create a floor and a back for hanging on a shop wall.
30
/
38
Pipe Clamp Holder
Store bar and pipe clamps right under your workbench where they'll always be close at hand. Just screw sections of 4-in.-diameter PVC pipe under your workbench and slide the clamps into the pipe.
Cheap Workshop Storage Solutions You Can DIY
31
/
38
Staining Spindles
Check out this speedy method for staining a whole staircase's worth of spindles.
Cut a 2-in.-diameter PVC pipe 6 in. longer than the spindles you're staining, wash it thoroughly and glue a cap on one end with PVC cement. Drill or saw a 2-1/2-in. hole in one end of a scrap board and screw the board to a sawhorse to support the pipe. Twist a small screw hook into each spindle end and a screw eye into a 6-in. dowel handle.
To stain, suspend a spindle in the pipe and fill the pipe until the spindle is submerged. Wear a garden glove over a plastic glove and pull up the spindle while wiping off the excess stain. Then hang the spindles on a knotted rope to dry. Add small amounts of stain to the tube each time to compensate for what gets used.
How to Install Stair Spindles
32
/
38
No-Ladder Gutter Cleaner
This gutter cleaner is inexpensive, takes about 10 minutes to make and will help you avoid ladder climbing. Buy 3/4-in. PVC pipe, two elbows, a garden hose coupling and a cap at a local home center. Drill 1/16-in. holes in the cap as shown. Make the handle long enough to comfortably reach your gutters, and cement the parts together with PVC glue.
The Best Gutter Guards for Your Home
33
/
38
I-Spy Rain Gutter
Here's a quick and easy way to eyeball rain gutters for possible clogs—before the next downpour causes an overflow. Cut a 60-degree angle on the end of a piece of PVC pipe and tape a hand mirror to the angled end. Hoist the mirror above the gutter to spot leaves and mini jams.
Gutters: How to Fix Overflowing Gutters
34
/
38
Bike Rack
Use PVC pipe to build a bike rack. Perfect for a corner of the garage, this DIYer used PVC to make a bike rack that holds five bikes upright. Depending on your bike wheel specifications, you can modify dimensions so they all fit snugly.
Courtesy of Quinnatotor via Reddit
35
/
38
Fish House
This DIYer used a cut piece of PVC pipe to add to the fish tank. If your fish tank is large enough, try connecting some PVC pipe to make tunnels and “homes” for your fish.
Try using an old coffee pot as a dual-purpose fish tank and planter.
Courtesy of bluepenguine12 via Reddit
36
/
38
Hide Cords
Help keep your home office space organized by using PVC pipe to hide cords. Just wrangle all those computer, mouse, monitor and phone cords and hide them in some PVC pipe. You can even use some colorful tape to match your office décor.
37
/
38
Bat and Ball Holder
With the downloadable plan from The Tinker Shop, and about $15 in materials, you can make this nifty PVC bat and ball holder.
Check out more sports equipment storage hacks here.
Photo: Courtesy of The Tinker Shop/Etsy
38
/
38
Towel Drying Rack
Need a place to dry all of those wet towels, swimming suits and life jackets? This sturdy PVC rack has room for everything and you can place it where you need it—alongside the backyard pool or near your cabin or summer home. Hang clean dry towels on the rack and when everyone jumps out of the pool, all they have to do is grab one!
Photo: Courtesy of TowelMaid/Etsy
